Framed hydraulic press machine

Framed hydraulic press machine adopts whole steel plate welding framed structure, good rigidity, high ability to resist partial loading , it's suitable for grinding wheel, rubber, plastic and other plastic materials and metal products etc, it can also be used to calibrate the bending, compression working etc. Compact structure, reasonable design, and it's easy to operate, safe to use.

Simple technical data of the Framed hydraulic press machine:

Main cylinder pressure:1000T  Main cylinder stroke: 1400mm

Max.opening distance: 2000mm  Generator power:55Kw

Working table: 2500mm*2000mm
If you need more information about Framed hydraulic press machine, please contact us.Welcome to visit us for elbow making machine,pipe bending machine,pipe expanding machine and the tee machine.

Hydraulic press safe operating attention
 
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches.