Hydraulic press

Where the high-quality hydraullic press is----HEI YAN GROUP

HYY series hydraulic press machine is a new product, which is especially suitalbe for bigger workpiece.

Features of Hydraulic press
     1 it is albe to move so as to be convenient to lift workpiece
     2 if equipped with our heater, it shall get better effect.
 
 Structure of hydraulic press
     This unit consists of press mill body, hydraulic ram with movable workable,
    hydraulic ram with lift worktable ,hydraulic system, induction detacher,movable worktable,
   guide roller and electric control system

 Application
     It is mostly used for the detaching of 720,460,258,or 168 rolling mill, roller and bearing,
    also for gearing, shaft,gear and other structural components
 
If you need more information about hydraulic press, please contact us.Welcome to visit us for elbow making machine,pipe bending machine,pipe expanding machine and the tee machine.
                   
               

Hydraulic press safe operating attention
 
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches.