Hei Yan can supply various pressure hydraulic press, following is the simple description of the 1500 T Six pillars hydraulic press: Main cylinder pressure:1500T Main cylinder stroke: 450mm Working table:1450*2400 Generator power:37KW
Characteristics of Hydraulic press machine: The series equipment is mainly designed for carbon steel, stainless steel 1D, 1.5D elbow pushed into the cold type, pushing system means a steel ball through the ball back into the system and push mandrel forming the system are two core push rod system with a semi-automatic molding machine stripping device. Welcome to visit Hei Yan, we would like to show our elbow forming machine, pipe expanding machine,pipe bending machine, tee machine, hydraulic press and the assorted beveling machine, mould to you
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches
