Hydraulic pressure Machine is used to change the shape of metal, specifically to form and to cut it. Usually, a piece of metal is passed through the punch press. The machine clamps down on the metal and cuts or forms it to a predetermined shape.
Hydraulic Pressure machine are the machines in which rubber compound and other materials are shaped as finished products. As are the machines, so are the finished products. Ranging from 50 to 2500 Tons, theses Presses are manufactured with operation safety and optimum machine production in mind.
This series hydraulic pressure machine has two electric apparatus control systems, relay control and PLC control. It has three operating modes, adjustment, manual type and semi-automatic type to realize constant pressure and constant stroke technology.
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches
