Manufacture of 200 T hydraulic press

Technical data of the 200 T hydraulic press
Normal pressure:200T
Main cylinder stroke: 450mm
Max. opening distance: 650mm
Working table:700*700
Motor power:15kw

Single-column 200 T hydraulic press used high-quality steel frame, using the optimized design of welded structures, mainly applicable to indentation forming, bending, access, assembly and printing work, it's easy to form flow process line.

Single column hydraulic press is suitable for sheet metal stretch forming, repression of thin sheet, bending, correction of shaft parts, press-fit and other processes, It's particularly suitable for home appliances, hardware, aluminum etc.
Please kindly contact with us for your interested elbow forming machine,pipe bending machine,pipe expanding machine,hydraulic press, hot induction heating power.

Hydraulic press safe operating attention
 
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches.