Tube in the external cavity mode locking of the tunnel was hydraulic roof paragraph from the guide rod into the set up with the core of the forming chamber bending by the removal material ejection device, all adopt by PLC intelligent operation.
The host including body, frame, clamping cylinder, side pushi cylinder, stripping agency group, and control institutions by the power station, stopper, piping and electrical control box, action containers If you are interested in our Pipe fittings hydraulic press,please contact us,We also supply elbow forming machine,pipe expanding machine,pipe bending machine.
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches
