|
|
| Punch press |
|
| Type:HYY series |
| Specification:1000T -2500T |
| Application:applied to press, bale,reforming-practical and economical.with simple structure |
| Delivery:30-60days |
 |
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Punch press:
Hei yan group professionally manufacture punch press according to customers requirements.
A punch press has two coacting components: the punch, which is attached to the reciprocating ram of the machine, and the die, which is clamped onto a bed or anvil whose flat surface is perpendicular to the path of the ram. In operation, the punch pushes against the workpiece, which is held in the die. A blanking die shears out a slug of sheet metal to make it into a blank that will fit dies for subsequent punch-press operations.
Punch press:
Punch press is made up of body(frame),closing cylinder ,side cylinder, mold emptier.control mechanism is made up of power station,stopmeans,piping and electric control box, operational box.
Welcome to visit Hei Yan to know more information about Punch press.our eompany also professionally manufacture elbow forming machine,pipe expanding machine,bending machine,medium frequency,steel pipe,pipefittings and so on. |
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Data/ mode |
HYY-100 |
HYY-150 |
HYY-200 |
HYY-250 |
HYY-300 |
HYY-400 |
HYY-500 |
HYY-600 |
HYY-800 |
|
Capacity
(T) |
100 |
150 |
200 |
250 |
300 |
400 |
500 |
600 |
800 |
|
Table area
(LRXFB)
(mm) |
800*1000 |
900*1200 |
1000*1200 |
1000*1500 |
1200*1500 |
1200*1800 |
1200*1800 |
1500*2000 |
2000*2500 |
|
Open height
(mm) |
650 |
800 |
950 |
950 |
1100 |
1100 |
1100 |
1250 |
1500 |
|
Stroke(mm) |
500 |
600 |
700 |
700 |
800 |
800 |
800 |
900 |
1000 |
|
Descending speed(mm/sec) |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
|
Pressing speed(mm/sec) |
9/25 |
10/30 |
10/25 |
7.5/25 |
7/20 |
8/20 |
8/20 |
8/20 |
7/16 |
|
Ascending speed(mm/sec) |
220 |
235 |
250 |
250 |
250 |
250 |
250 |
250 |
240 |
|
Cushion capacity
(mm) |
30 |
60 |
70 |
100 |
100 |
150 |
150 |
200 |
250 |
|
Cushion stroke
(mm) |
200 |
250 |
250 |
300 |
300 |
350 |
350 |
400 |
400 | |
|
|
|
Hydraulic press safe operating attention
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
