We manufacture the most efficient hydraulic pressure that is suitable for various operations.
Structure of hydraulic pressure: This unit consists of press mill body,hydraulic ram with movable workable,hydraulic ram with lift worktable,hydraulic system,induction detacher,movable worktable,guide roller and electric control system
1The hydraulic pressure is a specially designed machine in high accuracy and excellent performance, for deep drawing and forming metal plats.the capacity range from 10 tons to 2000 tons is available as customer's demands. 2 According to the requirement of current production speed and machine safely, the press adopts special loop to reach both 3 Safe and precise control systems are easy to handle and work with great efficiency. 4 Systemized hydraulic unit is designd of leak-prevention,anti-vibration and easy-maintenance. 5 Each hydraulic pressure is manufactured under strict quality control process to assure the best performance
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches
