|
|
| single hydraulic press machine |
|
| Type:HYY series |
| Specification:20-1000T |
| Application:Drawing,bending,flanging,cold extruding,blanking processes for metal materials,straightening |
| Delivery:30-60days |
 |
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
single hydraulic press machine:
Hei yan group is specialized in manufacturing single hydraulic press machine.
single hydraulic press machine,which suitable for the adjusting of the parts like bearing and moulding materials. At the same time,the machine tool can also complete the technology function of bending,marking and shelling of plate materials parts.and the function of stetching of simple parts,itcan also be used to press powder and plastic products which the requirement are not strict.
Main usage of the Single hydraulic press machine:
The machine has frame and four columns two structures, mainly applicable to all types of black and nonferrous metal sheets covering parts deep, shallow drawing process ,it can also be used for bending, milling, stamping and other craft.
If you are interested in our single hydraulic press machine,please visit to our factory to know more information about single hydraulic press machine.hei yan also professionally manufacture elbow forming machine,bending machine,pipe expanding machine,medium frequency,tee machine,steel pipe,pipefittings and so on. |
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Data/ mode |
HYY-100 |
HYY-150 |
HYY-200 |
HYY-250 |
HYY-300 |
HYY-400 |
HYY-500 |
HYY-600 |
HYY-800 |
|
Capacity
(T) |
100 |
150 |
200 |
250 |
300 |
400 |
500 |
600 |
800 |
|
Table area
(LRXFB)
(mm) |
800*1000 |
900*1200 |
1000*1200 |
1000*1500 |
1200*1500 |
1200*1800 |
1200*1800 |
1500*2000 |
2000*2500 |
|
Open height
(mm) |
650 |
800 |
950 |
950 |
1100 |
1100 |
1100 |
1250 |
1500 |
|
Stroke(mm) |
500 |
600 |
700 |
700 |
800 |
800 |
800 |
900 |
1000 |
|
Descending speed(mm/sec) |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
|
Pressing speed(mm/sec) |
9/25 |
10/30 |
10/25 |
7.5/25 |
7/20 |
8/20 |
8/20 |
8/20 |
7/16 |
|
Ascending speed(mm/sec) |
220 |
235 |
250 |
250 |
250 |
250 |
250 |
250 |
240 |
|
Cushion capacity
(mm) |
30 |
60 |
70 |
100 |
100 |
150 |
150 |
200 |
250 |
|
Cushion stroke
(mm) |
200 |
250 |
250 |
300 |
300 |
350 |
350 |
400 |
400 | |
|
|
|
Hydraulic press safe operating attention
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
