- Related Products
- FAQ
- Related News
-
The use of Bending Machine
The use of Bending Machine
Bending Machine brochure:
Electric pump to use reference manual. high pressure oil pipe, quick joint, working cylinder, plunger pump, bending part.First working cylinder screw the internal thread of block parties, so that tanks installed in the bracket on the rear wheels down.
Bending Machine included;
According to the diameter of the pipe , set in the plunger on the two rollers corresponding to the slot toward the die, and then into the appropriate size hole in the flower board, and then spend plate cover, will be the pipe inserted into the slot, then high-pressure tubing quick connector on the end of the activities part of the pull back and set the connector in the work tank, electric fuel pump put on the screws tightened, it can bend. Pipe finished, relax oil discharge screw, plunger automatically reset.
The high pressure oil out put from the electric oil pump, through the high pressure oil pipe into working cylinder, high pressure oil push the plunger pump in the cylinder, forming the pushing force, then through the bending part to bend the pipe.
Notes
(1) electric pump to use reference manual.
(2) Never be in a load, unload quick connector.
(3) The equipment is the oil to medium oil and the equipment necessary to do the cleaning and maintenance work, in order to avoid blockage or leakage affect the results.
Hei Yan supply Bending Machine, Cold Draw Tee Machine, Elbow Forming Machine, PLC Pipe Bending Machine, Expanding Machine, Bevel Machine.
Your demand, our reliability.